Basic Owner’s Manual
Wearable Camera
HX-A100
Model No.
Please read these instructions carefully before using this product, and save this manual for future
use.
This document explains basic operations of the unit. For more detailed
explanation, please refer to “Owner’s Manual (PDF format)” which is
recorded in the enclosed CD-ROM.
Register online at www.panasonic.com/register (U.S. customers only)
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
VQT4X87
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation
instructions and use only shielded interface cables with ferrite core
when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name:
Model No.:
Panasonic
HX-A100
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Marketing Company of North America
1-800-211-PANA (7262)
Support Contact:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
HX-A100
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
3
VQT4X87
Product Identification Marking is located on the bottom of the unit.
U.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
Conforms to UL STD 60065
Certified to CAN/CSA STD C22.2 No.60065
Conforme à la norme CAN/CSA C22.2 No.60065
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Contains FCC ID: VPYLBVX532
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to
OET65.
This equipment has very low levels of RF energy that are deemed to comply without testing of
specific absorption ratio (SAR).
THE FOLLOWING APPLIES ONLY IN CANADA.
Contains IC: 772C-LBVX604
This device complies with RSS-210 of the IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received,
including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed to comply without testing of
specific absorption ratio (SAR).
4
VQT4X87
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on
the unit and the applicable safety instructions listed below. Keep these operating instructions handy
for future reference.
1) Read these instructions.
12) Use only with the
2) Keep these instructions.
cart, stand, tripod,
bracket, or table
specified by the
3) Heed all warnings.
manufacturer, or
sold with the
4) Follow all instructions.
apparatus. When a
5) Do not use this apparatus near water.
cart is used, use caution when moving the
cart/apparatus combination to avoid injury
from tip-over.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
13) Unplug this apparatus during lightning
Install in accordance with the
storms or when unused for long periods of
manufacturer’s instructions.
time.
8) Do not install near any heat sources such
14) Refer all servicing to qualified service
as radiators, heat registers, stoves, or
personnel. Servicing is required when the
other apparatus (including amplifiers) that
produce heat.
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
9) Do not defeat the safety purpose of the
have fallen into the apparatus, the
polarized or grounding-type plug. A
apparatus has been exposed to rain or
polarized plug has two blades with one
moisture, does not operate normally, or has
wider than the other. A grounding-type plug
been dropped.
has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
5
VQT4X87
-If you see this symbol-
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid
in the European Union.
If you wish to discard
this product, please
contact your local
authorities or dealer and
ask for the correct
method of disposal.
∫ Cautions for use
Keep this unit as far away as possible from
electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
≥ If you use this unit on top of or near a TV, the
pictures and/or sound on this unit may be
disrupted by electromagnetic wave radiation.
≥ Do not use this unit near cell phones because
doing so may result in noise adversely
affecting the pictures and/or sound.
≥ Recorded data may be damaged, or pictures
may be distorted, by strong magnetic fields
created by speakers or large motors.
≥ Electromagnetic wave radiation generated by
microprocessors may adversely affect this
unit, disturbing the pictures and/or sound.
≥ If this unit is adversely affected by
electromagnetic equipment and stops
functioning properly, press the reset button.
Do not use this unit near radio transmitters
or high-voltage lines.
≥ If you record near radio transmitters or
high-voltage lines, the recorded pictures and/
or sound may be adversely affected.
About connecting to a PC
≥ Do not use any other USB cables except the
supplied one.
6
VQT4X87
Contents
∫ How to open the owner’s manual (PDF format)
When you insert the CD-ROM and open the [INDEX.pdf] in the CD-ROM, the Owner’s Manual
list will be displayed. Click the document name of the Owner’s Manual you would like to open.
≥ Adobe Reader is required to view the PDF file. Please download it from the homepage of
Adobe Systems Incorporated.
(Important) About the Waterproof/
Dustproof...................................................8
Accessories............................................. 11
Read this first..........................................12
What you can do with this unit..............13
Others
Recordable time/Number of recordable
pictures.................................................... 27
Requests when disposing of this
unit ........................................................... 28
Specifications ......................................... 30
Optional accessories ............................. 31
About copyright...................................... 32
Accessory Order Form (For USA and
Puerto Rico Customers)......................... 33
Limited Warranty (ONLY FOR U.S.A.
AND PUERTO RICO)............................... 34
Warranty
Preparation
Wearing this unit.....................................14
Power supply...........................................16
Charging the battery ......................... 16
Charging and recording time............. 17
Recording to a card ................................18
Cards that you can use with this
unit..................................................... 18
Inserting/removing a microSD
card ................................................... 18
Turn this unit on/off ................................19
(For Canadian Customers)..................... 36
Useful Information (Only For Latin
American Countries) .............................. 37
®
Wi-Fi function........................................20
Connecting directly with a
smartphone .............................................21
Installing Image App.......................... 21
Connecting this unit with a
smartphone ....................................... 21
Starting Image App............................ 22
Setting up with Setup Wizard ................23
Setting date and time..............................24
Basic
Recording ................................................25
Recording motion pictures ................ 25
Recording still pictures...................... 25
Playback ..................................................26
7
VQT4X87
(Important) About the Waterproof/
Dustproof
Waterproof/Dustproof Performance
This unit’s waterproof/dustproof rating complies with the “IP58” rating. Provided the care
and maintenance guidelines described in this document are strictly followed, this unit
can operate underwater, to a depth not exceeding 1.5 m (5 feet) for a time not exceeding
30 minutes. *
This does not guarantee no destruction, no malfunction, or waterproofing in all conditions.
* This means that this unit can be used underwater for specified time in specified pressure in
accordance with the handling method established by Panasonic.
∫ Handling of this unit
≥ Waterproofing is not guaranteed if the unit is subject to an impact as a result of being hit or
dropped etc. If an impact to this unit occurs, it should be inspected (subject to a fee) by a
Panasonic’s Service Centre to verify that the waterproofing is still effective.
≥ The waterproof performance may be degraded due to the strong water pressure when this unit is
used deeper than 1.5 m (5 feet) underwater.
≥ When this unit is splashed with detergent, soap, hot spring, bath additive, sun oil, sun screen,
chemical, etc., wipe it off immediately.
≥ Do not rinse with running water, such as tap water.
≥ Waterproof function of this unit is for sea water and fresh water only.
≥ Any malfunction caused by customer misuse, or mishandling will not be covered by the warranty.
≥ Cards are not waterproof. Do not handle with a wet hand. Also, do not insert wet card into this
unit.
≥ Do not open or close the side cover when your hands are wet or water droplets are present on
this unit. Failure to do so may lead to damage such as rusty terminals caused by water droplets.
≥ Foreign objects may adhere to the inner side of the side cover (around the rubber seal or
connecting terminals) when the side cover is opened or closed in places with sand or dust
etc. If you close the side cover with foreign objects adhering to it, water may enter the
inside. Be very careful because doing so may cause malfunctions.
≥ Do not leave this unit for a long period of time in places where temperature is very low (at high
altitude etc.) or very high (inside a car under strong sunlight, close to a heater, on the beach, etc.)
Waterproof performance may be degraded.
≥ The inside of this unit is not waterproof. Water leakage will cause malfunction.
≥ If any foreign object has adhered to the inner side of the side cover, remove it.
≥ If any liquid such as water droplets has adhered to this unit or inner side of the side cover,
wipe off with a soft dry cloth. Do not open or close the side cover near the water, when
underwater, using wet hands, or when this unit is wet. It may cause water leakage.
8
VQT4X87
∫ When inner side of the lens is fogged (condensation)
Condensation may occur and the inner side of the lens may be fogged when this unit is moved to a
warm area from a cold area, such as at high altitude.
It is not a malfunction or failure of this unit. It may be caused by the environment in which
this unit is used.
≥ Be careful of condensation since it causes lens stains, fungus and unit malfunction.
What to do when inner side of the lens is fogged
≥ Turn off this unit and open the side cover in a place with constant ambient temperature, away
from high temperatures, humidity, sand and dust. The fog will disappear naturally in about 2 hours
with the side cover open when the temperature of this unit gets close to the ambient temperature.
≥ Contact Panasonic’s Service Centre if the fogging does not disappear.
Check before using underwater
Do not open or close the side cover in places with sand and dust, close to water, or with wet
hands. Sand or dust adhering may cause water leaks.
1
Open the side cover.
1
Slide the LOCK switch A to the left to
unlock the side cover.
B: Unlocked when the red indicator is visible
B
2
Slide the side cover downward to
open it.
A
2
Check that there are no foreign objects on the inner side of the side cover.
≥ If there are any foreign objects, such as lint, hair, sand, etc., on the surrounding area, water will
leak within a few seconds causing malfunction.
3
If there is foreign matter adhering to the unit, remove it.
≥ Be extremely careful to remove any sand etc. that may adhere to the sides and corners of the
rubber seal.
≥ Wipe it off with a dry soft cloth if there is any liquid. It may cause water leaks and malfunction if
you use this unit with liquid adhered.
4
Check for cracks and deformation of the rubber seal on the side cover.
≥ The integrity of the rubber seals may decrease after about 1 year, with use and age. To avoid
permanently damaging this unit the seals should be replaced once every two years. Please
contact Panasonic’s Service Centre for related costs and other information.
5
Close the side cover securely.
1
Close the side cover and slide it
upward.
2
Slide the LOCK switch to the right to
lock the side cover.
≥ Lock securely to the points where the
red portion of the LOCK switch is no
longer visible.
≥ Securely close it until it clicks.
≥ To prevent water seeping into this unit, be careful not to trap foreign objects such as
liquids, sand, hair or dust etc.
9
VQT4X87
Using this unit underwater
≥ Use this unit underwater at a depth of down to 1.5 m (5 feet) with the water temperature between
0 oC and 35 oC (32 oF and 95 oF).
≥ Do not use this unit at a depth of over 1.5 m (5 feet).
≥ Do not use it in hot water over 35 oC (95 oF) (in a bath or hot spring).
≥ Do not use this unit underwater not longer than 30 minutes continuously.
≥ Do not open or close the side cover.
≥ Do not apply shock to this unit underwater. (Waterproof performance may not be maintained, and
there is a chance of water leak.)
≥ Do not dive into the water holding this unit. Do not use this unit in a location where the water will
splash strongly, such as rapid flow or waterfall. (Strong water pressure may be applied, and it may
cause malfunction.)
≥ This unit will sink in the water. Take care not to drop this unit.
Caring for this unit after using it underwater
Do not open or close the side cover until the sand and dust is removed by rinsing the
camera with water.
Make sure to clean the camera after using it.
≥ Thoroughly wipe off any water droplets, sand, and saline matter on your hands, body, hair, etc.
≥
It is recommended to clean the camera indoors, avoiding places where water spray or sand may fall.
Do not leave this unit uncared for longer than 60 minutes after using it underwater.
≥ Leaving this unit with foreign objects or saline matter on it may cause damage, discoloration,
corrosion, unusual odour, or deterioration of the waterproof performance.
1
Rinse with water with the side cover closed.
≥ After use at the seaside or underwater, soak the unit in fresh water pooled in a shallow container
for about 10 minutes.
2
Drain water by holding this unit and shaking it lightly a few times.
≥ After using this unit at the seaside or underwater, or after washing it, water will remain at
the speaker site or mic site of this unit for a while and it may cause lower sound or sound
distortion.
≥ Pay careful attention to prevent this unit from dropping.
3
Wipe off water drops on this unit with a soft, dry cloth and dry this unit in a
shaded area that is well ventilated.
≥ Dry this unit approx. 1 hour or more.
≥ Dry this unit on a dry cloth.
≥ Do not dry this unit with hot air from dryer or similar. It will deteriorate the waterproof performance
or cause failure due to deformation.
≥ Do not use chemicals such as benzine, thinner, alcohol or cleanser, soap or detergents.
4
Confirm that there are no water droplets, open the side cover, and wipe off
any water droplets or sand left inside using a soft, dry cloth.
≥ Water droplets may adhere to the card, etc. when the side cover is opened without thoroughly
drying. Also, water may accumulate in the gap around the card slot or the terminal connector. Be
sure to wipe any water off with a soft, dry cloth.
≥ The water droplets may seep into this unit when the side cover is closed while it is still wet,
causing condensation or failure.
In case water enters this unit, stop the use and consult your dealer.
Malfunctions resulting from water leakage due to wrong handling by customers are not subject to
compensation.
10
VQT4X87
Accessories
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of January 2013. These may be subject to change.
* Join the earhook parts together before
use.
Slide the adjuster (small) A into the opening
beneath the tabs B and C and push it in until
it clicks into place.
Earhook*
VYK6C87
(Including Adjuster
(Small))
Adjuster (Large)
Adjuster (Large): VGQ1L74
Adjuster (Small): VGQ1L38
Armband Case
Extended Band
VFC4920
USB cable
K2KYYYY00221
CD-ROM
Software
CD-ROM
Owner’s Manual
VFF1186
11
VQT4X87
Read this first
∫ About recording formats and compatibility of this unit
≥ This unit is an MP4 format (MPEG-4 AVC file standard) Wearable Camera for recording high-
definition motion pictures.
≥ AVCHD and MPEG2 motion pictures are different formats, and are not therefore supported by
this unit.
∫ About the portrait rights
Be sure to pay special attention to the privacy, the portrait rights, etc. of the subject when you use
this unit. Use it at your own risk.
∫ Indemnity about recorded content
Panasonic does not accept any responsibility for damages directly or indirectly due to any type
of problems that result in loss of recording or edited content, and does not guarantee any
content if recording or editing does not work properly. Likewise, the above also applies in a case
where any type of repair is made to this unit.
∫ About the clock setting
Make sure to set date and time before recording. (l 24)
∫ For the purposes of this Owner’s Manual
≥ Pictures may be slightly different from the original.
≥ Depending on the firmware version you are using, captured screens described in this Owner’s
Manual may differ from the actual screens.
≥ Names, icons, contents and services of applications may be changed with no prior notice. Please
note that they may differ from the descriptions of this Owner’s Manual.
≥ microSD Memory Card and microSDHC Memory Card are referred to as the “microSD card”.
≥ Smartphone and tablet computer are referred to as the “smartphone”.
≥ Pages for reference are indicated by an arrow, for example: l 00
∫ Cards that you can use with this unit
microSD Memory Card and microSDHC Memory Card
12
VQT4X87
What you can do with this unit
You can enjoy a variety of functions by connecting this unit to a smartphone or an access point.
For detail, refer to the Owner’s Manual. (PDF format)
DLNA-compatible devices
Playback on DLNA-compatible
devices
You can play back the contents stored in
this unit on the DLNA-compatible
devices.
Live broadcasting *1
Using the “LUMIX CLUB” and
USTREAM services, you can
broadcast live motion pictures.
Connecting to Access Point
LUMIX CLUB
USTREAM
Connecting direct to the
smartphone*2
Image
App
≥ Facebook
≥ YouTube™, etc.
XXXXX
XXXXX
XXXXX
≥ Live view
≥ Remote control
≥ Playback
≥ Deletion/Copy
≥ Data uploading to web
services
Recording*3
*1 Once you make the settings, you can perform a live broadcast with only the button operation on
this unit from the next time on.
*2 The functions available for the direct connection to the smartphone are also available for the
connection via an access point.
*3 You can record motion pictures or still pictures without connecting to the smartphone.
13
VQT4X87
Preparation
Preparation
Wearing this unit
Wear the main unit and camera unit.
≥ If you have felt discomfort after a long period of use,
stop the use or loosen the tight fit by slightly
loosening the adjuster, etc.
≥ For the direction of the camera, check the actual
image on the Live view screen.
Camera unit
Main unit
Fastening the main unit using the Armband Case
1 Insert so that you can see the
2 If the band is not long enough,
attach the extended band C.
buttons on the main unit.
A: Hook and loop fastener
≥ Attach by passing the tip of the armband
through the buckle portion B of the extended
band.
3 Fasten to your arm.
∫ About the Armband Case
The Armband Case can be used as a portable
holder.
≥ When fastening the main unit, try not to drop
the camera unit to avoid a shock and try not
to scratch the lens.
≥ When fastening to your arm, remove the
camera unit from the armband case.
≥ When removing the camera/main unit from the Armband Case, avoid pulling the camera/main
unit connection cable.
≥ You can use an optional Multi Mount (VW-MKA100) for a variety of scenes.
14
VQT4X87
Attaching the camera unit to the earhook to wear
1 Insert the camera unit until it
2 Loosen the camera/main unit
clicks into place.
connection cable B to the
shape of an ear, and fit it in the
holder C.
L
UP
≥ Insert so that the projecting part A of the
camera will face up.
L
UP
3 Hook the earpieces D to ears
so that the camera unit will be
positioned on the left, and
adjust the size.
4 Hold the camera attachment
portion F , and adjust the
direction of the lens.
UNLOCK
LOCK
≥ If the direction of the lens cannot be changed,
loosen the adjustment knob G slightly and
tighten it after adjusting the direction of the
lens.
≥ If the camera unit is shaky, tighten the
adjustment knob G.
≥ Adjust by slowly pulling the adjuster E
sideways.
≥ If you adjust in such a way that the camera
unit comes into close contact with the cheek,
you can record less blurry images.
∫ How to remove the
∫ How to attach the adjuster (Large)
(supplied)
camera
Hold the camera attachment
portion as shown in the figure,
and remove the camera unit in
the direction of the arrow.
When the earhook is too tight,
remove the adjuster of the earhook,
and replace it with the supplied
adjuster (Large).
1
2
Press H in the direction
of the arrow using the
supplied adjuster (Large)
to pull out the attached adjuster.
Insert the both side of supplied adjuster
(Large) until it clicks into place. (l 11)
≥ Do not touch the lens or pull the cable while attaching or removing.
≥ When you adjust the adjuster, do so slowly without applying too much force.
≥ If the adjustment knob comes off, attach it as indicated
in the right figure.
15
VQT4X87
Power supply
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
≥ This unit has a built-in rechargeable lithium-ion battery. Do not remove except when
disposing of this unit. (l 28)
≥ The battery will not be charged if this unit is turned on. Connect it with the PC to charge
the battery after turning it off.
≥
It is recommended to charge the battery in a temperature between 10
oC and 30
oC (50
oF and 86 oF).
B
C
A
A: LOCK switch
B: USB cable (supplied)
C: Unlocked when the red indicator is visible
1 Slide A to the left to unlock the side cover and slide the side cover
downward to open it.
2 Connect the USB terminal of this unit to a PC with the USB cable B
(supplied).
≥ Insert the USB cable securely all the way.
≥ The Power lamp will flash red at an interval of 2 seconds (approximately 1 second on, 1 second
off), indicating that charging has begun.
It will turn off when the charging is completed.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ Do not heat or expose to flame.
≥ Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a long
period of time with doors and windows closed.
≥ If operating time is short even after fully charging the battery, the battery is worn out and needs to
be replaced. Please contact your dealer.
≥ When the PC is in a power saving mode such as a standby state, the battery may not be charged.
Cancel the power saving mode, and connect this unit again.
≥ Operation is not guaranteed when devices are connected through USB hubs or by using
extension cables.
≥ Operation cannot be guaranteed on all devices having a USB terminal.
16
VQT4X87
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC (77 oF)/humidity: 60%RH
Maximum continuous
recordable time
Actual recordable
time
Charging time
Recording mode
1920
k
k
1080/60p
1080/30p
1 h 50 min
2 h 20 min
2 h 5 min
55 min
1 h 10 min
1 h 5 min
1 h 20 min
1 h 25 min
55 min
1920
1280
k
720/60p
1280
k
720/30p
2 h 35 min
2 h 45 min
1 h 50 min
2 h 5 min
4 h 30 min
640k
360/30p
1920k
1080/60fps
1280k
720/120fps
1 h 5 min
1 h 10 min
640k
360/240fps
2 h 20 min
≥ These times are approximations.
≥
The indicated charging time is for when the battery has been discharged completely. Charging time
and recordable time vary depending on the usage conditions such as high/low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning this unit on/off, etc.
≥ The main unit heats up after use or charging. This is not a malfunction.
≥
The power lamp flashes (Flashing with approx. 0.5 second period) when the remaining battery time
becomes low. The remaining battery capacity is displayed on the screen when using Image App (
l
21).
≥ For information about charging with a mobile USB charger or an AC adaptor, check the support
site.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA.
The power plug is the disconnecting device. Install this unit so that the power plug can be
unplugged from the socket outlet immediately.
THE FOLLOWING APPLIES ONLY IN LATIN AMERICAN COUNTRIES.
The mains plug is the disconnecting device. Install this unit so that the mains plug can be
unplugged from the socket outlet immediately.
When the Power lamp is flashing during charging
Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):
≥
Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or covered with a
foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off this unit before removing.
≥ The environment is at an extremely high or low temperature. Wait until the temperature has
returned to an appropriate level and try charging again. If you are still unable to charge, there may
be a fault in this unit or the connecting device.
Flashing with approx. 2 second period (off for approx. 1 second, on for approx. 1 second):
During charging normally (l 16)
Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds):
≥ When the battery is over discharged or the temperature of the battery is too high or low. It can be
charged, but it may take a few hours to complete the charging normally.
≥
It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it may start
flashing in approx. 4 second intervals until charging is completed depending on the conditions of use.
17
VQT4X87
Recording to a card
This unit can record motion pictures or still pictures to a microSD card.
Cards that you can use with this unit
Use microSD Memory Card (512 MB/1 GB/2 GB) or microSDHC Memory Card (4 GB/8 GB/
16 GB/32 GB) conforming to Class 4*2 or higher of the SD Speed Class Rating*1 for motion
picture recording.
≥ Operation of microSD cards other than described above is not guaranteed.
*1 SD Speed Class Rating is the speed standard regarding
continuous writing. Check via the label on the card, etc.
e.g.:
*2 Use microSD cards conforming to Class 6 or higher of the SD Speed Class Rating for
“Slow motion mode”. If you use microSD cards conforming to Class 4 or less of that, the
recording may stop suddenly.
≥ Please check the latest information on the support website below.
(This website is in English only.)
≥ Keep the Memory Card out of reach of children to prevent swallowing.
Inserting/removing a microSD card
Caution:
Check that the access lamp A has gone off.
≥ When this unit is accessing the microSD card (such as recognition, recording, playback and
deletion), the access lamp lights up.
A
C
B
D
C: Unlocked when the red indicator is visible
1 Slide the LOCK switch B to the left to unlock the side cover and
slide the side cover downward to open it and then insert (remove)
the microSD card into (from) the card slot.
≥ Face the terminal side D upward and press it straight in as far as it will go.
≥ Press the center of the microSD card and then pull it straight out.
2
Close the side cover and slide the LOCK switch
B
to the right to lock it.
≥ Close the side cover and slide it upward and then lock it.
≥ Securely close it until it clicks.
18
VQT4X87
When using a microSD card not from Panasonic, or one previously used on other equipment, for
the first time on this unit, format the microSD card. When the microSD card is formatted, all of
the recorded data is deleted. Once the data is deleted, it cannot be restored.
≥ When the microSD card is removed, a notification sound rings, and the access lamp flashes fast.
(a state in which a microSD card is not inserted)
≥ Do not touch the terminals on the back of the microSD card.
≥ Do not apply strong shocks, bend, or drop the microSD card.
≥ Electrical noise, static electricity or the failure of this unit or the microSD card may damage or
erase the data stored on the microSD card.
≥ Do not expose the terminals of the microSD card to water, dirt or dust.
≥ Do not place microSD cards in the following areas:
j In direct sunlight
j In very dusty or humid areas
j Near a heater
j Locations susceptible to significant difference in temperature (condensation can occur.)
j Where static electricity or electromagnetic waves occur
≥ About disposing of or giving away the microSD card.
(Refer to the Owner’s Manual (PDF format).)
∫ About the access lamp
≥ When the access lamp is lit, do not:
j Remove the microSD card
j Turn this unit off
j Insert and remove the USB cable
j Expose this unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/microSD card or this
unit.
Turn this unit on/off
Press the power button to turn on this unit.
The power lamp is turned on.
To turn off this unit
Hold down the power button until the power
lamp goes off.
Proceed to “Connecting directly with a
smartphone” (l 21) and “Setting up
with Setup Wizard” (l 23) to finish the
setup of this unit.
You can enjoy the functions of this unit
after finishing the setup.
19
VQT4X87
Wi-Fi® function
∫ Use this unit as a wireless LAN device
When using equipment or computer systems that require more reliable security than wireless LAN
devices, ensure that the appropriate measures are taken for safety designs and defects for the
systems used. Panasonic will not take any responsibility for any damage that arises when using the
camera for any purpose other than as a wireless LAN device.
®
∫ Use of the Wi-Fi function of this unit is presumed to be in countries
where this unit is sold
There is the risk that this unit violates the radiowave regulations if used in countries other than those
where this unit is sold, and Panasonic takes no responsibility for any violations.
∫ There is the risk that data sent and received via radio waves may be
intercepted
Please note that there is the risk that data sent and received via radio waves may be intercepted by
a third party.
∫ Do not use the camera in areas with magnetic fields, static electricity
or interference
≥ Do not use this unit in areas with magnetic fields, static electricity or interference, such as near
microwave ovens. Radio waves may not reach the camera.
≥ Using the camera near devices such as cordless telephones or any other wireless LAN device
that use the 2.4 GHz radio wave band may cause a decrease in performance in both devices.
∫
Do not connect to the wireless network you are not authorized to use
Do not attempt to connect to the wireless networks that you are not authorized to use (SSID*) as it
may be considered as unauthorized access.
* SSID refers to the name of device that is used to identify a network over a wireless LAN
connection. If the SSID matches for both devices, transmission is possible.
∫ Before use
To use a Wi-Fi function with this unit, you need an access point or destination device equipped with
a wireless LAN function.
≥ Do not connect to the wireless LAN connection via unknow wireless access point.
≥ Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using an access
point.
≥ When using an access point, we strongly recommend that you set a encryption to maintain
information security.
≥
Before sending motion pictures or still pictures, we recommend you charge the battery fully.
≥ When sending data on a mobile network or tethering, high packet communication fees may be
incurred depending on the details of your contract.
≥ This unit may not connect to an access point depending on the radio wave condition.
≥ When using the Wi-Fi function, do not cover the Wi-Fi transmitter with your hand.
≥ The Wi-Fi transmitter may become warm when using the Wi-Fi function; however this is not a sign
of a malfunction.
20
VQT4X87
Connecting directly with a smartphone
Installing Image App
The Image App is an application for the smartphone provided by Panasonic.
Required Operating Systems for Image App
The following Operating Systems of the smartphone are supported.
AndroidTM device:
iOS device:
Android 2.2 to Android 4.2
iOS 4.3 to iOS 6.0
≥ The service may not be able to be used properly depending on the type of smartphone being
used. For compatible devices, see the following support site.
1 Connect your device (Android or iOS) to a network.
2 Android device: Select “Play Store”.
SM
iOS device: Select “App Store ”.
3 Enter “Panasonic Image App” into the search box.
4 Select “Image App” and install it.
≥ The icon will be added to the menu.
Connecting this unit with a smartphone
Connecting with a WPS-compatible smartphone
Please read the manual of your smartphone and check if the smartphone is compatible with WPS*.
≥ If your smartphone is not compatible with WPS, connect this unit with the smartphone according
to “Selecting SSID of this unit to connect with a smartphone”. (l 22)
* WPS stands for “Wi-Fi Protected SetupTM”.
1 Press the Wi-Fi/WPS button continuously to
change the Wi-Fi mode lamp to [ ].
≥ The Wi-Fi mode lamp [ ] flashes.
2 Set the Wi-Fi function to ON on the smartphone
setup menu.
≥ Refer to the manual of your smartphone.
3 Press and hold the Wi-Fi/WPS button for 3 seconds or more.
≥ The Wi-Fi mode lamp [ ] flashes faster.
4 Select the connection using the WPS button (or WPS function) in the
Wi-Fi settings of the smartphone within 3 minutes.
≥ Wi-Fi mode lamp [ ] will turn on when the connection is completed.
21
VQT4X87
Selecting SSID of this unit to connect with a smartphone
Select this unit's SSID (Wireless network name) on a smartphone and enter password to connect
with the smartphone.
≥ Change the default SSID and password after completing the first setting. (l 23)
1 Press the Wi-Fi/WPS button continuously to change
the Wi-Fi mode lamp to [ ].
≥ The Wi-Fi mode lamp [ ] flashes.
2 Set the Wi-Fi function to ON on the smartphone
setup menu.
≥ Refer to the manual of your smartphone.
3 Tap the SSID of this unit (below) on the Wi-Fi network screen of the
smartphone
.
≥ Password entry screen is displayed.
4 Enter password (below).
≥ Wi-Fi mode lamp [ ] will turn on when the connection is completed.
Default setting
SSID:
Password:
A100-wearable
paR9We58n
≥ Wi-Fi mode and Wi-Fi mode lamp will turn off if this unit cannot be connected with the
smartphone in approx. 30 minutes. Retry the connection setting from the Step1.
≥ If this unit and the smartphone are too far apart from each other when making the settings, the
connection may not be established. Move the devices closer to each other before making the
settings.
≥ Even if you have changed the SSID/password, the default SSID/password (above) are restored
when you initialize the network settings. We recommend you keep this manual in a safe place.
Starting Image App
Start Image App.
≥ When the [Date & time] screen appears, perform the clock setting. (l 24)
22
VQT4X87
Setting up with Setup Wizard
After making the settings according to the setup wizard screens, you can use the main functions of this unit.
Proceed to complete the setup by following the on-screen instructions.
≥ The setup wizard is displayed at the time of purchase and after a long period of non-use during
which the battery ran down.
1 Synchronize the time of this unit with that of smartphone.
≥
≥
Once the clock is set, recording, live broadcasting, and other functions of this unit can be used correctly.
It may take approximately 60 seconds to synchronize the time of the smartphone with that of this unit.
2 Change the SSID and password for this unit.
≥ If the default SSID and password for this unit are used, a third party may obtain
compromised information or use the SSID and password for unlawful purposes. Make
sure to change the SSID and password.
≥ We recommend you periodically change the SSID and password for this unit.
≥ Set a password different from an SSID. Avoid setting a password that can be easily
guessed, and set the one consisting of both alphabetic and numeric characters.
≥ If a new SSID and password have been written down on a piece of paper, etc., manage
them so that they will not be compromised.
≥
When the SSID and password for this unit are set to the default ones, the setup wizard is displayed.
≥ Change the SSID and password for this unit.
j Enter an SSID consisting of alphanumeric characters and/or symbols. The length must be
between 1 to 32 characters.
j Enter a password consisting of both alphabetic and numeric characters. The length must be
between 8 to 64 characters.
j When connecting to the smartphone after changing the SSID and password, connect with a
new SSID and password.
3 Make the connection settings for the access point mode to use
devices connected to a wireless router, etc.
≥ Enter the SSID and password (authentication key) of the access point.
∫ When connecting by
(If the device is Android)
1
2
3
Tap
.
Tap the wireless access point to connect.
Enter password.
≥ This allows you to operate this unit via an access point using your smartphone.
4 Make the connection destination settings for a live broadcast.
≥ Enter the SSID and password (authentication key) of the access point.
Up to three access points can be registered. Register the access point you use, such as the
wireless router in your home or the mobile router you use outside.
≥ The settings can also be made from the Image App menu.
≥ You can perform a live broadcast by setting the following.
j Make the live broadcast settings.
For detail, refer to the Owner’s Manual. (PDF format)
For compatible access points, see the following support site.
23
VQT4X87
Acquire a USTREAM ID/Password/Program using a smartphone or a PC.
About the USTREAM
With this video-sharing website, you can stream and watch motion pictures this unit is recording.
Refer to the USTREAM site for details.
About “LUMIX CLUB”
Refer to the “LUMIX CLUB” site for details.
To use the Live broadcast, access following website.
≥ Refer to the Owner’s Manual (PDF format) for how to play back on a DLNA-compatible TV or
broadcast a motion picture.
Setting date and time
The clock of this unit is synchronized with that of the smartphone.
Synchronize to adjust the clock, etc.
When you start Image App connecting with this unit for the first time, a message asking you to
set the date and time will appear. (This message will also be displayed if this unit remains
unused for a long period of time.)
Perform Steps 2 below to set the date and time.
Preparation:
Connect this unit with the smartphone and start Image App. (l 21)
1 Tap
# [Camera setup].
2 Tap [Date & time].
≥ When you want to adjust the clock, change the time of the smartphone first, and then synchronize
the time with this unit.
≥ It may take approximately 60 seconds to synchronize the time of the smartphone with that of this
unit.
≥ When the built-in clock battery runs down, the clock setting returns to the default state. When the
battery of this unit is in a charged state, the built-in clock battery is also charged automatically. If
you leave the battery in this unit in a charged state for approximately 24 hours, the built-in clock
battery stores the clock setting for approximately 4 months.
≥ The setting range from 1 January 2013 through 31 December 2039 is available for time
synchronisation with the smartphone.
24
VQT4X87
Basic
Basic
Recording
Record motion pictures or still pictures using the smartphone as a remote control.
≥ For details, refer to the help of the Image App.
Preparation: Connect this unit with the smartphone and start Image App. (l 21)
1080/30p
Angle of view
Select Standard or Wide
mode.
Live view
Displays an image from the
camera of this unit.
≥ Also outputs sound from
the microphone of this
unit.
XXXXX
Still picture recording
icon
Motion picture recording
icon
Recording motion pictures
1 Tap
.
≥ This unit is set to the recording mode.
2 Tap the motion picture recording icon to start.
≥ Starts recording.
3 Tap the motion picture recording icon again to stop recording.
≥ Stops recording.
Recording still pictures
1 Tap
.
≥ This unit is set to the recording mode.
2 Tap the still picture recording icon to record still picture.
≥ Updating Live view images may stop while recording still pictures.
∫ About recording with this unit
You can record images using this unit without any connection with
this unit, turning the Wi-Fi mode off.
≥ Motion pictures and still pictures cannot be recorded at the same
Recording start/
stop button
time.
Photoshot button
25
VQT4X87
Playback
Motion pictures or still pictures stored in this unit are played back with the smartphone.
≥ For more information, refer to the help of the Image App.
Preparation:
Connect this unit with the smartphone and start Image App. (l 21)
1 Tap
.
≥ Thumbnails of motion picture or still picture stored in this unit are displayed.
2 Tap
(
).
∫ For playing back motion pictures
3 Tap MP4.
4 Tap the thumbnail of motion picture you want to play back.
≥ Motion picture playback screen is displayed.
5 Tap the playback icon on the screen to play back motion pictures.
≥ Tapping or dragging the slide bar will start playback
from the desired position of a motion picture file.
A
A: Slide bar
∫ For playing back still pictures
3 Tap JPEG.
4 Tap the thumbnail of still picture you want to play back.
≥ Still picture playback screen is displayed.
≥ Dragging (Flicking) to right or left will play back the next or previous still picture.
∫ To copy the data stored in this unit to the smartphone
Copy using "Picture Share" settings.
≥ For "Picture Share" settings, refer to the Owner’s Manual. (PDF format).
26
VQT4X87
Others
Others
Recordable time/Number of recordable pictures
microSD cards are only mentioned with their main memory size.
Recording modes/approximate recordable time
≥ The default setting is [1920k1080/30p] Mode.
≥ The stated times are the approximate recordable times for continuous recording.
≥ The recordable time may be reduced if recording with a lot of action is recorded or recording of
short scene is repeated.
≥ Maximum continuously recordable time: 6 hours
≥ The recording is paused once when the continuous recording time exceeds 6 hours, and the
recording will automatically resume after a few seconds.
A: Favours image quality, B: Favours Recording time
Normal shooting
mode
1920k1080/ 1920k1080/
1280k720/
1280k720/
Picture size/
Frame rate
640k360/30p
60p
30p
60p
30p
Transfer rate (VBR)
4 GB
8 GB
Max.28 Mbps Average 15Mbps Average 15Mbps Average 9Mbps Average 3Mbps
19 min
40 min
35 min
35 min
1 h
3 h
6 h
1 h 10 min
2 h 20 min
4 h 40 min
1 h 10 min
2 h 20 min
4 h 40 min
2 h
microSD card
16 GB 1 h 20 min
4 h 10 min
8 h 20 min
12 h
25 h
32 GB 2 h 40 min
Slow motion mode
Picture size/
Frame rate
1920k1080/60fps
1280k720/120fps
640k360/240fps
Transfer rate (VBR)
Average 15Mbps
15 min
30 min
1 h
Average 9Mbps
13 min
Average 3Mbps
21 min
4 GB
8 GB
16 GB
32 GB
27 min
45 min
microSD card
55 min
1 h 30 min
3 h
2 h
1 h 50 min
Approximate number of recordable pictures
≥ The number of recordable pictures depends on the subject being recorded.
microSD card
Picture size
4 GB
1100
1600
8 GB
2200
3400
16 GB
4500
6500
32 GB
8500
5.3M (3072k1728)
3M (2304k1296)
13500
27
VQT4X87
Requests when disposing of this unit
When disposing of your used products, remove the battery built into this unit after
initializing the network settings, and please cooperate in recycling of the battery. Please
refer to page 29 about how to remove the battery.
≥ Please make sure that the battery is disposed of at an officially assigned location, if there is one in
your country.
Do not disassemble this unit other than when disposing of this unit.
This is the rechargeable battery for this unit.
Do not use other than with this unit.
Do not charge the rechargeable battery
when it has been removed.
≥ Do not place in fire or heat it.
≥ Do not puncture with nails, subject it to
impact, disassemble or modify it.
≥ Do not touch metal to the r and s terminals.
≥ Do not store or carry together with necklaces
or hairpins, etc.
≥ Do not heat in microwaves or ovens, etc.
≥ Do not charge, use or leave in hot places
such as next to fires or in extremely hot
weather.
≥ Do not put into water.
This may cause leaking, overheating, fire or
rupture.
≥ If a leak should occur, by no means touch the
liquid with bare hands.
If the liquid gets on the body or clothes, wash
well with water. If the liquid gets into your
eyes, there is a danger of blindness. Do not
rub the eyes; after washing immediately with
clean water, consult your physician.
Keep removed screws etc. out of the reach
of small children.
If accidentally ingested there will be adverse
physical effects.
≥ Should you suspect that such an object has
been ingested, consult your physician
immediately.
Battery used for this unit
Name:
Lithium ion (Li-ion)
rechargeable battery
DC 3.7 V
Nominal voltage:
28
VQT4X87
4
Remove the 4 screws indicated in
the figure below, and remove the
heatsink E.
How to remove the battery
When disposing of your used products, delete
personal information from this unit by initializing
the network settings.
This figure describes the disposal of this
unit, it is not instruction for repair. If
disassembled, repair is not possible.
≥ Disassemble after the battery runs out.
≥ If it cannot be removed smoothly, contact
Panasonic’s Service Center.
≥ Keep disassembled parts out of reach of
children.
5
Remove the connector F of the
camera unit, and lift up the circuit
board.
1
Open the side cover, and remove
all of the 6 screws indicated in the
figure below.
≥ Use a cross-slot screwdriver (commercially
available).
6
Remove the battery by using a
screwdriver.
2
Remove the circuit board on the
front side (button side) of this unit,
and remove the flexible circuit
board A.
Regarding the handling of used batteries
≥ Insulate the terminals with cellophane tape or
similar.
≥ Do not disassemble.
3
After pulling out the built-in battery
connector B, pull out the flexible
circuit board C, and pull out the
speaker connectorD upwards.
29
VQT4X87
Specifications
Wearable camera
Information for your safety
Power source:
3.7 V (When using battery)/5.0 V (When using USB)
Power consumption:
Recording; 3.8 W
Charging; 5.3 W
Minimum required illumination:
Approx. 6 lx
Approx. 1 lx with the Color Night Rec function
Wireless transmitter:
Compliance standard; IEEE802.11b/g/n
Frequency range used;
Central frequency 2412 MHz to 2462 MHz [11ch]
Encryption method; Wi-Fi compliant WPA™/
WPA2™/WEP
Access method; Infrastructure mode
USB:
Reader function
microSD card; Read only (No copyright
protection support)
Battery charging function (Charges from USB
terminal when the main unit is off)
Hi-Speed USB (USB 2.0), USB terminal Type micro-B
Dimensions:
Camera unit;
26 mm (W)k26.5 mm (H)k66 mm (D)
[1.02 q (W)k1.04 q (H)k2.6 q (D)]
Main unit;
59.5 mm (W)k94 mm (H)k25 mm (D)
[2.34 q (W)k3.7 q (H)k0.98 q (D)]
Mass (Weight):
Camera unit;
Approx.30 g (Excluding the cable portion)
(Approx.0.067 lbs.)
Main unit;
Approx. 117 g (Approx. 0.258 lbs.)
[without a microSD card (optional)]
Mass (Weight) in operation:
Approx. 167 g (Approx.0.368 lbs.)
[with a microSD card (optional)]
Operating temperature:
0 oC to 40 oC (32 °F to 104 °F)
Motion picture recording format
(Normal shooting mode/Slow motion mode):
MPEG-4 AVC file format compliant (.MP4)
≥ For picture size, recordable time and transfer
rate of a motion picture, refer to page 27.
Motion picture compression:
MPEG-4 AVC/H.264
Audio compression:
AAC, 128 kbps
Still picture recording format:
JPEG (Design rule for Camera File system,
based on Exif 2.2 standard)
≥ For picture size of a still picture and number
of recordable pictures, refer to page 27.
Recording media:
microSD Memory Card (512 MB/1 GB/2 GB),
microSDHC Memory Card (4 GB/8 GB/16 GB/32 GB)
Image sensor:
1/4.1z 1MOS image sensor
Total; Approx. 3320 K
Effective pixels (Motion picture/Still picture);
Approx. 2800 K (Wide mode), Approx.
1620 K (Standard mode/Image stabilizer:
Off), Approx.1310 K (Standard mode/Image
stabilizer: On)
(16:9)
Lens:
F2.5 mm Focal length; 1.68 mm
Field of view;
Approx.160° (Wide mode)
Approx.117° (Standard mode/Image
stabilizer: Off)
Approx.104° (Standard mode/Image
stabilizer: On)
Minimum focus distance;
Approx. 30 cm (12 q)
Shutter speed:
1/30 to 1/12000
Image stabilizer function:
Electronic image stabilizer
Level shot function:
Available
Operating humidity:
10%RH to 80%RH
Waterproof/Dustproof performance:
Equivalent to IEC 60529 “IP58”
Battery operation time:
See page 17
Microphone:
MONO
30
VQT4X87
Optional accessories
Accessory No.
VW-MKA100
Figure
Description
Multi Mount
NOTE:
Accessories and/or model numbers may vary by country. Please consult your local
dealer.
Product numbers correct as of January 2013. These may be subject to change.
31
VQT4X87
About copyright
This product is licensed under the AVC patent
portfolio license for the personal and
∫
Carefully observe copyright laws
Whatever you have recorded and created
can be used for your personal entertainment
only. Under copyright laws, other materials
cannot be used without obtaining
permission from the holders of the
copyrights.
non-commercial use of a consumer to (i)
encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer
engaged in a personal and non-commercial
activity and/or was obtained from a video
provider licensed to provide AVC Video. No
license is granted or shall be implied for any
other use. Additional information may be
obtained from MPEG LA, LLC.
∫ Licenses
≥ microSDHC Logo is a trademark of SD-3C,
LLC.
≥ Microsoft®, Windows® and Windows Vista®
are either registered trademarks or
trademarks of Microsoft Corporation in the
United States and/or other countries.
≥ Microsoft product screen shot(s) reprinted
with permission from Microsoft Corporation.
≥ IBM and PC/AT are registered trademarks of
International Business Machines Corporation
of the U.S.
This product incorporates the software licensed
under the GNU General Public License Version
2.0 (GPL V2.0), the GNU LESSER General
Public License Version 2.1 (LGPL V2.1) or the
other open source software licenses. A copy of
the corresponding source code licensed under
GPL V2.0 or LGPL V2.1 is available to you in
response to your request. For the detailed terms
and conditions thereof and the contact
information, please refer to the Owner’s Manual
shown in the attached Owner’s Manual CD-
ROM.
≥ Intel®, Pentium®, Celeron® and Intel® Core™
are trademarks of Intel Corporation in the
U.S. and/or other countries.
≥ AMD Athlon™ is a trademark of Advanced
Micro Devices, Inc.
≥ iMovie, Mac and Mac OS are trademarks of
Apple Inc. registered in the U.S. and other
countries.
≥ App Store is a service mark of Apple Inc.
≥ Android and YouTube are trademarks or
registered trademarks of Google Inc.
≥ Facebook® is a trademark of Facebook, Inc.
≥ The Wi-Fi CERTIFIED Logo is a certification
mark of the Wi-Fi Alliance.
≥ The Wi-Fi Protected Setup Mark is a mark of
the Wi-Fi Alliance.
≥ “Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and
“WPA2” are marks or registered marks of the
Wi-Fi Alliance.
≥ DLNA, the DLNA Logo and DLNA
CERTIFIED are trademarks, service marks,
or certification marks of the Digital Living
Network Alliance.
≥ Other names of systems and products
mentioned in these instructions are usually
the registered trademarks or trademarks of
the manufacturers who developed the system
or product concerned.
32
VQT4X87
Accessory Order Form (For USA and
Puerto Rico Customers)
Please photocopy this form when placing an order.
1. Model #
2. Items Ordered
Accessory #
Description
Price Each
Quantity
Total Price
Shipping & Handling
Subtotal
$6.95
Your State & Local Sales Tax
Total
3. Method of payment (check one)
American Express
VISA
Credit Card #
MasterCard
Expiration Date
Discover
Customer Signature
(Please do not send cash)
4. Shipping information (UPS delivery requires complete street address)
Ship To:
Mr.
Mrs.
Ms.
Phone#:
First
Last
Day
(
)
)
Street Address
City
Night
(
State
Zip
TO OBTAIN ANY OF OUR ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-6 PM M-F, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC NATIONAL PARTS CENTER
20421 84th Ave. S., Kent, WA 98032
In CANADA, please contact your local Panasonic dealer for more information on Accessories.
33
VQT4X87
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Marketing Company of North America (referred to as “the warrantor”) will,
for the length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.
Product or Part Name
Wearable Camera
Parts
Labor
1 Year
1 Year
All included Accessories
(Except Non-Rechargeable Batteries)
90 Days
Not Applicable
Only Non-Rechargeable Batteries
10 Days
Not Applicable
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies
to products purchased and serviced in the United States or Puerto Rico. This warranty is
extended only to the original purchaser of a new product which was not sold “as is”.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product
prepaid to:
Panasonic Exchange Center
4900 George McVay Drive Suite B McAllen, TX 78503
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s
Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping
Panasonic is committed to providing the most up to date information. Include a letter detailing the
complaint, a return address and provide a daytime phone number where you can be reached.
A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
34
VQT4X87
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which
result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation,
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning
damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office,
restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY
COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media
or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state
to state. If a problem with this product develops during or after the warranty period, you may contact
your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the
warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products
by visiting our Web Site at:
Or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave. S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of October 2012
35
VQT4X87
Warranty
(For Canadian Customers)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under
normal use and for a period as stated below from the date of original purchase agrees to, at its option
either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will
be made by Panasonic Canada Inc.
Camcorder Products - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold
“as is”, and which product was delivered to you in new condition in the original packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE
RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND
PLACE OF PURCHASE IS REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER
normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result
from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other
business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is
attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty. Rechargeable batteries are
warranted for ninety (90) days from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT
OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty
excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other
memory or recorded content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions
may not be applicable. This warranty gives you specific legal rights and you may have other rights which
vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
Our Customer Care Centre:
Telephone: 1-800-995-8649
Fax #: (905) 238-2360
For defective product exchange within the warranty period, please contact the original dealer or our
Customer Care Centre.
36
VQT4X87
Useful Information
(Only For Latin American Countries)
Customer Service
Customer Service Directory
Obtain product information and operative assistant; localize the closer distributor or
Service Center; buy spare parts and accessories by our web site to Latin American:
Also you may contact us directly by our Contact Center:
Panama
800-PANA (800-7262)
Colombia
Ecuador
Costa Rica
El Salvador
Guatemala
Chile
01-8000-94PANA (01-8000-947262)
1800-PANASONIC (1800-726276)
800-PANA737 (800-7262737)
800-PANA (800-7262)
1-801-811-PANA (1-801-811-7262)
800-390-602
From a cell phone: 797-5000
800-PANA-800 (800-7262-800)
0-800-PANA (0-800-7262)
0-800-00-PAN(0-800-00726)
0800-333-PANA (0800-333-7262)
0810-321-PANA (0810-321-7262)
0800-11-PANA (0800-11-7262)
809-200-8000
Venezuela
Uruguay
Peru
Argentina
Paraguay
Dominican Republic
Mexico Service
To obtain information in the Republic of Mexico contact us at:
email: [email protected]
Or you may contact us in the next following phones numbers:
01800-VIP-PANA (01800-847-7262) - Interior
(55) 5000-1200 - Mexico D.F. and Metropolitan Area
37
VQT4X87
38
VQT4X87
39
VQT4X87
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
© Panasonic Corporation 2013
VQT4X87
Printed in Japan
F0113MT0 ( 8000 )
|